top of page

Truespoke Wire Wheels

America's Favorite Wire Wheels Since 1974

Phone: 760-731-8303 | Open M-F 8-4 PST

Hub Cap Installation and Removal Instructions for Sabre Billet Aluminum Wheels

Please click on the first photo shown below and go step by step through the installation and removal process. For any questions or tech support, please call or email us. Thank you.

Sabre billet aluminum wheel with no hubcap. Installation instruction 1

Sabre Wheel upon arrival.

The wheel is shown without its hub cap.

Inserting the hub cap into the hubcap hole at an angle.

Angle the hubcap

Insert cap into the hub at an angle as shown.

Apply pressure to cap to cause it to seat into the hub.

Apply pressure to seat the cap.

Once the cap engages, using both hands push firmly on the cap to make it seat in the hub.

The set screw will lock the hubcap onto the wheel.

Security Set Screw

Find the small set screw and using the Allen Wrench, tighten the screw to lock the cap onto the wheel.

Set screw is tightened with the Allen wrench to keep the hub cap on.

Allen Wrench Fastening

Tighten the set screw firmly. Added security measure and theft deterrent.

Screw driver slot for prying the hub cap off.

Removal Slot

This small slot allows you to pry the cap off if necessary. Make sure the Set Screw has been loosened first before attempting.

The screwdriver can be inserted into the slot to pry the cap off if needed. Make sure the Set Screw has been loosened first.

Hub Cap Removal

If necessary, use a screw driver as shown to pry the cap up. Be careful not to scratch your wheel.

Now enjoy your new wheels!

Please send us photos of how the wheels look on your special car.

This video is a demonstration of how to remove the Sabre hub cap.

bottom of page